How to start a stolen car in GTA 6
Once you are in the driver's seat, a hotwire prompt appears: push the left and right sticks to the glowing spots until both semicircles fill and the engine starts. Keyless cars can't be hotwired at all, so you need the Key Cloner, which the story gives you in Chapter 3.

Steps
- Hold Up on the D-pad to open the WAiNK app and hold R1 (RB on Xbox) on the car to see if it is locked, alarmed, keyless or tracked.
- Walk to the driver's door and press Triangle (Y on Xbox) to try the handle.
- If it is locked, smash the window, or use the Slim Jim from Chapter 2 onward to open the door quietly.
- Get in, and when the hotwire prompt appears, push the left and right sticks toward the glowing spot on each bar.
- Hold both sticks there until the two semicircles fill and the engine starts.
- For a keyless car, stand by the door once you have the Key Cloner and use your phone to clone the key, which unlocks and starts the car.
Good to know
- Smashing the window of an alarmed car sets off the alarm and draws attention.
- Moses gives you the Slim Jim in the Chapter 2 mission Moses, and the Key Cloner comes in the Chapter 3 mission Clonin' Keys, Makin' GS.
- Many keyless supercars have advanced trackers that alert the police when you slow down, so keep your speed up after taking one.
- You can still pull a driver out of a car in traffic, but some fight back or are armed.